您好!欢迎来访www.565 net-必赢亚州官网!关于我们 | 联系我们 | 在线留言
全国统一服务热线
13793968666(来经理)
联系我们
联系人:王经理
联系电话:13793968666
地址:山东省东营市广饶县
租赁动态

长臂挖掘机破碎锤的正确的操作方式

文章作者:必赢亚州官网 发布日期:2020-10-28   来源:www.bluewebcreative.com
(1)每次使用时,首先应检查破碎锤的高压或低压油管是否有松动现象;同时,为小心起见,应随时检查其他地方是否漏油,以免因振动造成油管脱落,从而发生故障。
(1) When using each time, first check whether the high-pressure or low-pressure oil pipe of the breaking hammer is loose; at the same time, for the sake of caution, check whether there is oil leakage in other places at any time, so as to avoid the oil pipe falling off due to vibration, thus causing failure.
(2)在破碎锤作业时,钎杆应始终与被破碎物体的表面保持垂直状态。并使钎杆紧压被破碎的物体,破碎后应立即停止破碎锤工作,以防止空打。持续漫无目标的冲击会造成破碎锤的前体受损及主体螺栓松动,严重时可伤及主机本身。
(2) When the hammer is working, the drill rod should always be perpendicular to the surface of the broken object. And make the drill rod press the broken object tightly, and stop the work of the crushing hammer immediately after breaking, so as to prevent empty drilling. Continuous random impact will cause damage to the front body of the hammer and the bolt looseness of the main body, and in serious cases, the main engine itself may be injured.
(3)在水陆挖掘机工程进行破碎作用时,勿以摇晃钎杆使用,否则主体螺栓与钎杆均有破裂的可能;勿使破碎锤快速坠下或重击在坚硬的石块上,这样会因受过度冲击而损坏破碎锤或主机。
长臂挖掘机
(3) Do not use rocking drill rod when crushing in land and water excavator project, otherwise the main bolt and drill rod may be broken; do not make the hammer fall down quickly or hit hard stones, which will damage the hammer or host machine due to excessive impact.
(4)勿在水中或泥泞地中进行破碎作业,除钎杆外,破碎锤机体的其他部分均不宜浸在水或泥泞中,否则其上的活塞及其他功能相近的零件会因堆积泥渍而造成破碎锤过早损耗。
(4) Do not crush in water or muddy ground. Except drill rod, other parts of the hammer body should not be immersed in water or mud, otherwise the piston and other parts with similar functions will cause premature loss of the hammer due to accumulation of mud stains.
(5)当破碎特别坚硬的物体时,应先从边缘处开始,不要在同一点上连续敲打超过1min,以防止钎杆烧毁或液压油过热。
(5) When breaking a particularly hard object, it should start from the edge, and do not knock at the same point continuously for more than 1min, in order to prevent the drill rod burning or hydraulic oil overheating.
(6)不要用破碎锤的护板作为推动重物的工具,由于挖掘装载机均以小型机为主,其本身重量轻,若以其推重物时,轻则损伤破碎锤,重则造成主机吊臂断裂,甚至发生主机翻车事故。
(6) Don't use the guard board of the breaking hammer as a tool to push heavy objects. Since the excavators and loaders are mainly small machines, their own weight is light. If they are used to push heavy objects, the crushing hammer will be damaged, and if the weight is heavy, the crane arm of the main engine will be broken and even the main engine will overturn.
(7)不要在液压缸全伸或全缩时进行作业,否则会使冲击振动传至液压缸体,从而传至主机。
(7) Do not operate when the hydraulic cylinder is fully extended or fully retracted, otherwise the impact vibration will be transmitted to the hydraulic cylinder block and then to the main engine.
只有把上述所讲的内容设定好,我们的操作才算完成,如果您这边在后续的过程中有任何的问题,欢迎致电或者是在网站上边留言:长臂挖掘机
If you have any problems in the follow-up process, please call or leave a message on the website: long arm excavator
?

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】

XML 地图 | Sitemap 地图